SCG Spec. HD JE TTRS/RS3 2.5L TFSI DAZA/DNWA Forged Pistons

$1,225.00

Category:

Description

OUT OF STOCK.

SCG Spec. Heavy Duty JE pistons built specifically for the Audi DAZA & DNWA engines. Every dimension has been tailored specifically for correct compression ratio and clearances.

These pistons are built from a full round skirt forging for additional strength. These will hold up better under extreme combustion pressures and side loading.

  • JE Full Round Skirt Forging
  • JE Thermal Crown Coating
  • JE Tuff Skirt Coating
  • Total Seal Ring Package
  • 2618 T6 High Tensile Forged Aluminum
  • Stock Bore Size
  • 10:1 Compression Ratio
  • Heavy Duty 22mm Pins
  • Large Valve Pockets For Oversized Valves & Aftermarket Cams

Applications:
Audi 2.5L DAZA RS3/TTRS Engines
Audi 2.5L DNWA RS3/TTRS Engines

JE Tuff Skirt Coating:
JE Pistons’ trademark coating that is a lubricating, anti-friction/anti-wear coating applied to the piston skirt only. Tuff Skirt will not wear and is designed to withstand many different types of endurance applications, similar to those commonly found in NASCAR. Buildup is .0005” per surface and finished diameter of skirt should include the coating buildup.

JE Thermal Barrier Crown Coating:
Applied to the top of the piston and is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The .0015” thick coating can also assist in extending piston life by decreasing the rate of thermal transfer.

Additional information

Weight 9 lbs
Dimensions 15 × 15 × 8 in